When choosing a network cabinet, do I need to choose based on the total weight of the equipment?

When choosing a network cabinet, the total weight of the equipment is a very important consideration factor. The following is a point by point introduction:
1. The load-bearing capacity needs to match the weight of the equipment
Network cabinets have a clear maximum load-bearing capacity (e.g. 500kg, 800kg, 1000kg, etc.).
If the total weight of the equipment exceeds the upper limit of the cabinet's load-bearing capacity, it may cause structural deformation or even safety accidents.

2. The more devices there are, the heavier they are
Each server, switch, UPS and other equipment has a fixed weight, and as the number of devices increases, the cumulative weight significantly increases.
Especially in server intensive deployment scenarios (such as data centers), the total weight of equipment should be accurately evaluated.

3. Consider future expansion space
Not only should the weight of the current equipment be considered, but also the load-bearing space required for expansion should be reserved so that there is no need to replace the cabinet when adding equipment in the future.

4. Choose a cabinet with stable material
For situations with high load-bearing requirements, it is recommended to choose high-strength cabinets with thick steel plates, stable welding, and reinforced bases.
High quality cabinet structures are more stable and have stronger resistance to deformation.

5. Installation method and load-bearing related
Floor standing cabinets are suitable for carrying heavy equipment groups.
Wall mounted cabinets usually have a low load-bearing capacity (usually tens of kilograms) and are only suitable for installing lightweight network equipment.

6. The bottom structure needs to be stable
Cabinets designed with good load-bearing capacity usually come with reinforced chassis or can be equipped with support wheels to distribute pressure and prevent the cabinet from tipping or sinking.

7. Load bearing should also be considered during transportation and movement
If the cabinet needs to be moved frequently, a design with load-bearing universal wheels should be considered, and the load-bearing capacity of the wheels should also meet the weight requirements of the equipment.